Posts Tagged ‘configuration’


18 lipca 2017 Dodaj komentarz

Poster static-lsp SAS7210 -1Poster static-lsp SAS7210 -2

BGP konfiguracja na przykładzie routera 7750SR

2 lipca 2017 Dodaj komentarz


Multicast routing pim sparse mode in Cisco routers – example

15 Maj 2017 Dodaj komentarz
When we want to configure multicast routing pim sparse mode in Cisco router please read this example.
First, we have to run multicast routing.
ip multicast-routing
Protocol ip pim sparse mode works properly only when exists rendezvous point (RP). We have to create rendezvous point in the router. In this case, we create a loopback interface for example:
interface Loopback1
ip address
ip pim sparse-mode
Next, we have to connect rendezvous point with the loopback address.
ip pim rp-address
We to assume that VLAN 500 will be input VLAN and VLAN 600 will be output.
We have to create properly interface VLAN like below:
interface VLAN 500
ip address
ip pim sparse-mode
interface VLAN 600
ip address
ip pim sparse-mode
ip igmp static-group
The last line informs router that selected multicast group is carried from VLAN 500 to VLAN 600.
Finally, we have to switch on IGMP SNOOPING on selected interface for selected multicast group in output VLAN like below:
ip igmp snooping vlan 600 static 0100.5e00.020a interface Gi1/9 – same routers to
require mac address for the multicast group
or for other routers, the command line is:
ip igmp snooping vlan 600 static interface Gi1/9

APN configuration in NOKIA C3-01

3 sierpnia 2013 6 Komentarzy

Configuration APN in NOKIA C3-01 is easy. Pictures show that configuration is really easy.


in bookmark:

settings-configuration-personal settings

You have to create personal account (e.g. Poczta). Start the application Internet is using personal account.

Enjoy APN… Czytaj dalej…